Choosing the Correct Basement Sump Pump for Your Home

Having the right sump pump can help you deter water damage or worse, allowing you to enjoy all parts of your home, including your basement. A sump pump is designed to pump water out of your home before it can get to destructive levels, guarding against not only flood waters, but also alleviates an insurance claim and the cost of water damage mitigation. With a task this vital, your sump pump needs to be up for the job! Here are a few factors to think about before choosing one.

Submersible or Pedestal
Pedestal sump pumps, which are elevated so they are out of the water, used to be the norm, but this was before the technology was up to the challenge of making them waterproof. Submersible sump pumps are waterproof and have become much more common, but there is still some debate on which is the better investment. Submersible pumps cost more but offer the convenience of being able to be installed in the pit, and they tend to be quieter since they're submerged. Pedestal pumps are less expensive and last longer than a submersible pump, but they prevent the pit from being sealed, so it won’t work with a radon mitigation system.

Horsepower
Not all sump pumps are created equal, and regardless of whether your pump is submersible or Pedestal, it'll need to be powerful enough to remove water from your home if it floods. How powerful you need depends on a different factors, such as your house size and the severity of flooding your home might experience. A common size for many homes is 1/3 horsepower, which is powerful enough to remove water from an average home with low to moderate flood risk. If your house is larger or your flood risk is higher, however, you may need a 1/2 horsepower pump or, in the most extreme instances, a 3/4 horsepower pump.

Type of Switch
Once you have chosen the correct type and size of pump, you'll need to determine how it'll turn on and off. For peace of mind, you'll want a switch to turn your pump on automatically if your home starts to flood, and off once your home is out of danger. A switch that will turn your pump on automatically as water levels rise will protect your home even when you're not there to operate the pump. In the same instance, it will turn itself off automatically which will prevent the pump from running dry and burning itself out. There are a couple different types of switches: a mechanical switch, that uses a float to measure the water level and turns the pump on and off as it rises and falls, and an electronic switch, also known as a pressure switch or a capacitive switch, that electronically detects the water level and turns it on when it gets too high.

Planning for Power Outages
Your power source is something to keep in mind also. Many of the same conditions that would create a flood situation in your home could also mean a loss of power, so it's important to be sure you're ready for such an event. The safest way to protect your home is not to rely on electricity, which can go out, or a battery backup system, which needs to be maintained and can fail if there is too much demand. Instead, consider installing a water-powered backup sump pump. These systems tie into the municipal water supply and use its water pressure to power the pump, ensuring that you'll never be left without a working sump pump in case of an emergency.

Navigating the Waters
There are a lot of decisions to make when shopping for a sump pump, so call your neighborhood plumber today. Greenwell Plumbing technicians are there for you from the moment you decide to shop for a sump pump until the day the installation is complete.

Schedule Online(502) 205-2482

A Sewer Backflow Preventer Can Save you Time and Money

It's a nightmare to come home and find your basement flooded with smelly sewer water. Imagine your home not only getting flooded, but reeking of waste water. Everything the water touched would be ruined from the double-whammy of water damage plus the smell.

Luckily, you can save yourself from the cost and hassle of cleanup by installing a sewer backflow preventer. Also known as a backwater valve, a sewer backflow preventer will keep that sewer water where it belongs: in the pipes and out of your home.

What Does a Backwater Valve Do?

There are many reasons why sewer water could back up into your home. A blockage in the city's sewer lines could cause the water levels to rise into your home, or the pipes might not be able to handle the runoff after a big storm. As the pipes fill up with water with nowhere else to go, the laws of physics mean that your home will be a logical outlet unless you've got a way to stop it.

A sewer backflow preventer keeps sewer water out even when the pressure in the pipes build up. Backwater valves are designed to close when you need them to, preventing any water from getting into your home's sewer lines, overwhelming the pipes, and flooding your home.

Types of Backwater Valves

There are several different types of backwater valves that will protect your home from sewer backflow, so be sure to discuss your options with your plumber to make sure you make the best choice for your situation.

Regardless of which type of sewer backflow preventer you get, all of these valves do the same job, which is to block off your home's sewer lines and prevent the city's sewage from backing up into them. This also means that once the sewer starts to flood and the sewer backflow preventer kicks in, you'll need to conserve water inside your home. Every time you run the water or flush the toilet, your home's sewer lines are going to fill up a little more, and until the threat of flooding has passed, that water has nowhere to go.

Here are a few of the backwater valves available, and what you need to know about each.

Protect Your Home with One Phone Call

To fully protect your home, it's important that any sewer backflow preventer be installed professionally. Even more importantly, a conversation with your plumber can help you decide on the best option for your home and your budget. To discuss your options or schedule with one of our technicians, call your Simply Dependable plumber, Greenwell Plumbing today.

Schedule Online(502) 205-2482

What Are the Benefits of a Tankless Water Heater vs Tank Heater?

Are you considering an upgrade to your hot water heater, and wondering what the benefits of a tankless water heater vs. tank system? Whether it's time to replace your hot water heater or you're just considering your options for an upgrade, tankless or "on demand" hot water can offer some significant advantages. But how do you know if your home qualifies for a tankless water heater? First of all, your home must have natural gas or propane. Here are a few reasons to consider a tankless water heater.

Unlimited Hot Water

There's no ruder awakening than your water running cold before you're ready to turn it off, but you can say goodbye to shortened showers with a tankless water heater. Because the water is heated in the pipes as you use it, there's no end to the hot water. You can take as long of a shower as you would like, or everyone in the family can shower right after one another without it running cold.

Hot Water When You Want It

Another advantage to going tankless is hot water whenever you want it. The term "on demand" can be misleading since you'll have to let the water run for a few minutes to clear the cold water from the pipes, especially if you're using a faucet far from the water heater. But that problem can easily be resolved with the addition of a recirculation pump, which periodically recirculates the water in the line during peak times, such as in the mornings when everyone is showering.

Longer Heater Life

Do you get tired of changing your hot water heater every ten years or so? If so, switching to a tankless water heater may sound appealing since they last much longer before needing to be replaced. A well-maintained tankless water heater should last at least twenty years before needing to be replaced, and possibly longer if you opt to replace individual parts instead.

Less Risk of Water Damage

Speaking of water heaters going out, tankless water heaters have a much more benign way of ending their lives. A traditional water heater sits full of water day in and day out, so corrosion often takes them out of commission before their heating elements go bad. And when a water tank corrodes, most likely it's going to dump its contents at some point, resulting in flooding and water damage inside your home. With a tankless water heater, on the other hand, when it goes it's most likely just to stop heating the water, so a cold shower will be the worst you have to endure.

Space Saving

Unlike a traditional water heater, where you have to make room to store all the hot water you might want for a shower or a load of laundry or doing the dishes (or all of the above), a tankless water heater has no need to store anything. This means that all you need to find room for is the water heater itself, which is fairly small in comparison, and can easily be mounted against a wall somewhere.. Tankless water heaters are therefore ideal for small homes or apartments, or anywhere else where you don't want to dedicate a lot of space to storing hot water.

Energy Efficient and Environmentally Friendly

Last but not least, tankless hot water provides a way for you to be environmentally conscious without sacrificing your comfort. Because you're not wasting energy on keeping a large tank of water hot and at the ready all the time, you are ensuring that you only use energy to heat the water when you actually need it. The energy savings are reduced somewhat if you install a recirculation pump, which uses energy to periodically recirculate and reheat the water in the pipes, but they can be manually turned on and off or programmed to run only when you're likely to use the hot water a lot, which once again means only heating the water when you actually need it.

Comparing a Tankless Water Heater vs. Tank System

If you're having a hard time understanding the differences or making a decision, don't hesitate to talk to a professional. Call your neighborhood plumber, Greenwell Plumbing today and one of our experienced technicians will be happy to discuss your hot water usage and determine which type of system is right for you.

Schedule Online(502) 205-2482

Reasons You May Need a Water Leak Detector

Who needs a water leak detector? Well, as it turns out, almost every home owner can benefit from one. This may seem like an unnecessary purchase, but spending a little bit of money now can save you five, ten, or twenty times that amount later down the road. You can’t predict a water leak in your future, but it doesn't have to be hard (or expensive!) to prepare for it. Here are a few reasons you might need a water leak detector.

Pipes Leak

It's a fact of life: Pipes, connections, and fixtures get old, and as they do, they can spring leaks, particularly in areas such as under sinks, where they connect to fixtures, and in bathrooms and basements. Clogged or blocked pipes, or those that lead to a sewer blockage farther down, are especially likely to leak, as that water backing up in your pipes has to go somewhere. Homes with higher water pressure or malfunctioning water pressure regulators are also more likely to suffer from leaking pipes. An undetected small leak that doesn’t get repaired can do a lot of damage and become a lot bigger down the road, so it's important to catch these leaks as quickly as possible.

Water Heaters Can Fail Unexpectedly

One of the top reasons for water damage in the home is a failed water heater. When water heaters fail, the damage can be spectacular, opening up a leak and spilling their contents onto the floor. If your water heater is in an unfinished basement or crawl space, this may not be that big of a problem, but many people have their water heaters on the main floor or higher. Water runs downhill, which means everything underneath your water heater is bound to get wet if you don't catch the problem quickly -- and the quickest way is with a water leak detector.

Basements Leak, Too

When you think about it, it's more amazing when basements don't leak. There are so many ways that water can end up in your basement: pipes bursting, sewer lines backing up, windows leaking or cracks in the foundation letting in water during a rainstorm or flooding, water heater failures, or sump pump failures can all lead to water in your basement. Whatever the reason, having a water leak detector will notify you of the leak immediately, so that you can shut off the water, clean up the mess, and protect your home from damage.

Water Damage Can Be Hidden

What's the big deal about a leaky water heater or pipe, you might wonder? Surely you'll see the damage and be able to take care of it right away. Unfortunately, though, that is not always the case. Frequently the source of the water damage is a leaky pipe within the walls, or a roof dripping water into the attic where you don't see it or hear it. Even somewhere you'd think would be more obvious, like in the basement or in the cabinet under the sink, might not be noticed right away. A water leak detector is the only sure way to catch a leak in one of these hidden places before it does a lot of damage.

How a Water Leak Detector Works

A water leak detector can be as simple as a sensor and a device that makes noise when water is detected, or as complex as multiple smart devices that network and an app that sends notifications directly to your phone in case you aren't home. There is a range of leak detectors available on the market, and which is best for you may depend on your budget, your home, and your lifestyle. Not sure which works best for you? Call Greenwell today and one of our experienced technicians will be happy to help you make the best choice.

Schedule Online(502) 205-2482

Leaking Pipe: Possible Causes and Solutions

So, you've discovered a leaking pipe in your home, and probably at what feels like the worst possible time too, as emergencies never have convenient timing. What to do next? Even if your first move is to call a plumber, chances are you'd like to know what you're in for. Here are the top causes of a leaking pipe, and what you or your plumber will likely need to do about them.

A Clog in the Lines

When faced with a leak, most people assume the site of the leak is the problem, but often the root of the problem lies deeper -- quite literally. Tree roots, grease, inorganic materials, or a combination of things can create a major problem in your sewage pipe. Unfortunately, the water in your pipes has to go somewhere, and as a rule it will take the path of least resistance.

The water forcing itself out through a weak link may have damaged a joint or a seal, requiring the leak to be repaired, but the clog still needs to be addressed. Your plumber will need to inspect your sewage lines for clogs, and clear the line if he finds one.

Deteriorating Seals

If you're finding signs of a leaking pipe near an appliance, the culprit may be the seal between the pipes and the appliance. Seals deteriorate over time, hardening and forming cracks or gaps that let water through. If an issue with a seal is suspected, a technician will inspect the seals and replace them as needed.

Loose Connections

Whether it's from shifting pipes, movement such as a shaking washing machine, or mistakes made by an inexperienced DIYer, a leaking pipe can be caused by nothing more than a loose connection. The solution could be as simple as tightening everything back up again, but that is sometimes easier said than done, especially if you already thought you got it tight enough the first time. The connection could also be loose because something needs to be replaced.

Corrosion

Anything metal will corrode over time, but pipes are especially susceptible to corrosion if they were built more than about 30 years ago, before modern piping materials were available. Pipes today are less vulnerable to corrosion, but even they will need to be replaced eventually. If your leaking pipe is accompanied with discoloration or warping, corrosion may be the culprit. The corroded pipe will need to be replaced, and the rest of the system may need to be assessed, as well.

Shifting Pipes

Houses naturally shift as they settle over the years. While this is normal and expected, uneven settling can put pressure on the plumbing, especially the joints and connections. To resolve your leaking pipe, your plumber will inspect your system, tightening connections, replacing joints, and even updating the plumbing as necessary.

Excessively High Pressure

While high water pressure may seem like a good thing, especially when you're running a lot of water at once, but it can actually be quite damaging to your plumbing system. Extremely high-water pressure can force its way past connections and even crack pipes and cause damage to appliances. If you suspect your water pressure may be too high, have a professional test the pressure to confirm. You may need to have a water pressure regulator installed or a malfunctioning one replaced.

Act Fast to Resolve a Leaking Pipe

There are many potential causes for a leaking pipe, and usually the solution to the plumbing predicament isn't difficult or expensive. It's the secondary damage that can get you in big trouble. Leaking pipes can cause tremendous water damage, especially if the leak isn't caught right away, such as when it starts inside a wall. Call Maeser right away if you see signs of a leak. In addition to obvious signs such as dripping or pooling water, watch out for stains on the walls or ceilings, softened drywall or flooring, or a musty or mildew odor.

Schedule Online(502) 205-2482

Why should you buy a Hybrid Water Heater?

Why should you buy a Hybrid? Over the years there has been misconceptions on the value of a Hybrid. What the plumbing communities has found is that both the plumber and the homeowner have been not totally educated on the product. With plumbing supply reps now out in the field sharing and educating. It has now been easier explaining the value of a Hybrid water heater. With the knowledge and the ability to do a side by side comparison we have been able to narrow down what matters.

On an estimated annual operating cost you can save up to $300.00 dollars a year combined with the rebate from a co-op you can potentially recover the cost of the heater in four years. That in comparison to a conventional water heater you never truly recover the cost.

A Hybrid water heater only pulls enough energy while in Heat pump mode to power five 100 watt light bulbs. That’s an astonishing 512 watts in Heat pump mode. An amazing savings. The nice feature with a Hybrid is that when in Hybrid the heater recognizes a demand. So if the temperature reaches the threshold the Hybrid is smart enough to go into high demand to satisfy the tank.

The Hybrid water heater is an Energy Star certified fixture. Which make it eligible for most local utility rebate programs.

Another savings is you can tie the heater into a smart device and set the heater up for your life style. By creating a programed system you can limit the use in a day. Studies have been done to show an estimated saving of 70% in the first year.

If your water heater is over 10 years old, it may be showing signs of breaking down. Now is a great time to call the Simply Dependable plumbers to inquire about a Bradford White Hybrid water heater. Call Greenwell Plumbing!

Schedule Online(502) 205-2482

4 Signs You Need Water Pipe Repair

With the hustle and bustle of daily life, it can be tempting to put off on many types of home repair and maintenance. However, avoiding some of these can actually cause damage to your home that might end up being expensive to fix later on. If you notice any of these signs in your home, schedule water pipe repair or general plumbing services as soon as possible to help you avoid costly problems later on.

  1.  There are leaks in your home: Leaks on their own can be incredibly wasteful; a leaky faucet can waste 100 gallons of water every day. However, leaks can do more than just waste water around your home. Leaky faucets or other water fixtures can be a sign of a bigger plumbing problem.
  2. You notice low water pressure: If you're struggling with low water pressure in your shower or with your sink, that could be a sign of a plumbing problem. Whether the problem is with the fixture itself or with your water pipes, you may want to look into water pipe repair just in case.
  3. Some appliances aren't working well: When you're having a problem with your water pipes or general plumbing, you'll likely notice it in your home appliances. Pay particular attention to your dishwasher or washing machine; these appliances tend to use a lot of water, and if you notice your dishes or clothes aren't getting clean, it could be because of a plumbing issue that requires water pipe repair.
  4. You're having issues with utilities: If you can't figure out why your water won't heat up as much as you're used to, or if you notice your sump pump making strange noises. you're likely due for a call to your local plumbers. These issues can sometimes go overlooked due to how infrequently they require maintenance, but fixing these issues can save you from having to deal with expensive problems later on.

Thinking it might be time to call for water pipe repair or general plumbing services for your home? Contact Greenwell Plumbing to schedule your plumbing services today and avoid costly home repairs later on.

Schedule Online(502) 205-2482

How to Prevent a Sewage Backup with a Sewer Line Backflow Preventer

What Can Cause a Sewer Backup 

A sewer can get backed up for a variety of reasons, including blockages caused by grease, oil, and other foreign objects that accumulate in the pipes, as well as tree roots that grow into the pipes and cause them to become clogged.

There are three common ways a sewer can get plugged.

Damages a Sewage Backup Can Cause to Your Home

Sewage backing up in a home or business often brings all sorts of viruses and bacteria in with it that can cause illness to the occupants. The sewage can get all over carpeting, walls, furniture, and appliances, and it needs to be carefully cleaned up and removed. In some cases, when the amount of sewage backing up is great, many of these items can't be cleaned and sanitized properly and will have to be removed and thrown into the trash. In addition, there will be water and mold issues that will have to be addressed to get things back to normal.

What Is a Backwater Valve? 

A backwater valve is a device that is installed on a sewer line so the water and sewage can only flow one way. Backwater valves are also called backflow and sewer backup valves, and some municipalities in Indiana require them to be installed on the sanitary sewer lines for new and existing homes.

How to Prevent Sewage Backup With a Backflow Valve 

As the water and sewage flow from the home or business toward the septic tank or municipal sewage line, a flap opens to allow the effluence to flow freely in one direction. However, if the water gets forced back into the line, the flap will close and prevent the water from traveling all the way up the sewage pipes into your home.

How to Choose the Right Backwater Valve

There are six basic types of backwater valves homeowners and businesses can choose to install on a sewer line.

  1. Horizontal . These valves are installed along the horizontal length of the sewer pipe. The valves have a flap that automatically opens and closes depending on the flow of effluence.
  2. Horizontal/Manual Gate Valves . These valves combine the automatic flap operation with a manual gate system that you can physically open and close to prevent the backflow of sewage.
  3. Terminal Valves . These valves are placed at the point of discharge on a horizontal pipe to prevent backflow.
  4. Floor Drain/Backwater Valve . The check valve is placed in the floor drain on the basement floor to prevent sewage from entering it.
  5. Vertical Valve . These are specialized backflow preventers for installation on vertical pipes such as those on plumbing fixtures like holding tanks and P-traps on sinks.
  6. Normally Open Backwater Valve . This valve allows the passage of air through it to lower the pressure in the pipes. It stays open when the pipes are not in use.

Our experienced and trained team at Greenwell can answer all your questions and help you choose the right type of sewer backflow preventer that will work best for your specific circumstances. Call us today!

Schedule Online(502) 205-2482

4 Great Tips For Dealing With Your Home’s Water Heater

The Environmental Protection Agency (EPA) estimates that Americans waste more than 1 trillion gallons of water nationwide each year due to leaky faucets, malfunctioning toilets, bad sprinkler systems, and other issues. Water heater issues can not only cause all kinds of household problems, but plenty of financial concerns, as well. It’s time to improve on how you handle your home’s water heaters.
Here are some great tips for better handling your home’s water heater repair needs:

If you want to learn more about the importance of quality water heater repairs and work with contractors who are experienced in various plumbing services, give your Simply Dependable plumber a call today.

Schedule Online(502) 205-2482